By Nazar Orishchin, Minnesota real estate agent with RE/MAX Results and former engineer. Last updated November 2026.
Before I sold houses, I spent five years as an engineer. That habit stuck: when I walk a house before it lists, I look at it the way the buyer's inspector will. Most of what kills a deal or drops the price in Minnesota is not dramatic. It is water, age and small safety items that show up on the inspection report and make a buyer nervous.
This checklist is what I walk through with sellers. The first part is free to everyone. The full room-by-room list, what to skip, and the Minnesota paperwork you'll need are below for subscribers (it's free).
The 5 things that cause the most trouble on Minnesota inspections
Water near the foundation. Downspouts that dump next to the house and soil that slopes toward it are the root of most wet basements. Extend downspouts several feet out and make sure the ground slopes away. It is cheap and buyers notice.
Signs of past moisture in the basement. White chalky residue on block walls, water lines on drywall, or a musty smell. If there was a problem and it's fixed, gather the paperwork. If it's ongoing, deal with it before an inspector finds it.
Attic ventilation and ice dams. Ice dams are a Minnesota classic. Stained ceilings near exterior walls and frost on attic nails point to warm air leaking into the attic. Buyers and inspectors look for this every winter.
The age of the furnace, water heater and roof. You can't make them younger, but you can show they've been cared for. Service the furnace, replace the filter, and have receipts ready. A clean service tag calms a buyer.
Small safety items. Missing GFCI outlets near water, missing smoke detectors, and carbon monoxide alarms. Minnesota law requires a working CO alarm within 10 feet of every room used for sleeping. These are cheap fixes that otherwise show up as "safety" items on the report.
